Quartus Pro 19.2: List of QSF parameter names

Due to rather peculiar reasons described in this post, I found myself looking for all QSF parameter names that Quartus recognizes. I ended up searching a binary file in Quartus’ installation directory. So this is by no means an authoritative list, but since I made it, I thought I should post it. Just in case [...]

Quartus 17.1 (non-pro): List of QSF parameter names

Due to rather peculiar reasons described in this post, I found myself looking for all QSF parameter names that Quartus recognizes. I ended up searching a binary file in Quartus’ installation directory. So this is by no means an authoritative list, but since I made it, I thought I should post it. Just in case [...]

Reverse engineering Cyclone 10 transceiver’s attributes

Introduction This post summarizes some scattered findings I made while trying to make a Cyclone 10′s signal detect feature work properly for detecting a SuperSpeed USB LFPS signal. As it turned out, Cyclone 10′s transceiver isn’t capable of this, as explained below. But since the documentation on this issue was lacking, I resorted to reverse [...]